Best Plasma Cutter With Built In Compressor

Here is a list of top 10 Best Plasma Cutter With Built In Compressor in the market, which has made it possible to find the best Plasma Cutter With Built In Compressor for you. We have taken our time and devoted ourselves to deliver you the most up-to-date product reviews. You can use these reviews to decide who to buy from and what product to buy in the market.

Best Plasma Cutter With Built In Compressor

Hobart 500564 Airforce 12ci Plasma Cutter with Built-In Air Compressor 120V , Brown

$879.99  in stock
10 new from $879.99
2 used from $809.59
as of December 22, 2021 11:52 am

Features

  • Built in Air Compressor
  • Cuts faster than oxy fuel
  • Smaller heat-affected zone for less warping
  • No gas pressure settings for flame tuning needed
  • More precise cut, thinner kerf, less slag to clean up

Hypertherm 088096 Powermax 30 AIR Hand System with 15' Lead

$1,860.00  in stock
4 new from $1,860.00
as of December 22, 2021 11:52 am

Features

  • Operate it anywhere with the internal air compressor
  • Plug into any 120 or 240 V power with Auto-Voltage technology and included plug adapters
  • Highly portable. The smallest, lightest weight system in its class
  • New AIR T30 torch is rugged and designed to withstand the toughest environments
  • Do more in less time. Fast cutting speeds and superior cut quality result in less secondary operations

LOTOS LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter, Dual Voltage 110V/220V, 1/2 Inch Clean Cut, Brown

$448.00
$379.84
 in stock
2 new from $379.84
Free shipping
as of December 22, 2021 11:52 am

Features

  • ★ NON-TOUCH PILOT ARC PLASMA CUTTER: efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.
  • ★ OUTPUT & PERFORMANCE: 10-50 A DC output, 1/2” ideal clean cut and 3/4” maximum severance cut under 220/240V. 10-35A DC output, 1/3" ideal clean cut and 2/5" maximum severance cut under 110/120V. SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.
  • ★ THE COMPATIBLE CONSUMABLES SETS for this BROWN Color LTPDC2000D Plasma Cutter are "PCS22" or "PCS33". Please search "Lotos PCS22" or "Lotos PCS33". ★ It CANNOT compatible with Lotos PCON40 or PCON90 Consumables Sets or any other third part consumables set
  • ★ BUY WITH CONFIDENCE: We offer 30 days refund and a 3-YEARS Limited Warranty: include 1 Year NEW Replacement Warranty. ★ US BASED CUSTOMER CARE & SUPPORT TEAM: please feel free to contact us by phone or email, we always stand Back on Our Products. Please submit the registration form on our website.
  • ★ SAFE AND AT LOW COST: compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.

Hobart - 500575 AirForce 27i Plasma Cutter

$2,580.62  in stock
3 new from $2,580.62
1 used from $1,500.00
as of December 22, 2021 11:52 am

Features

  • Dual-voltage capability with MVP (multi-voltage plug)- allows you to connect to common 120 or 240 V power receptacles without the use of any tools - simply choose the plug that fits the receptacle.
  • XT30R torch- Designed for increased comfort with an ergonomic trigger safety, more efficient cooling and economical replacement cutting tips
  • Fan-on-demand- cooling system operates only when needed reducing power consumption and contaminants drawn into the machine.
  • Power factor correction (PFC) circuitry - Draws up to 30% less amperage for the same cutting range as compared to the competition. PFC expands operators work area via extension cord, while minimizing nuisance circuit breaker trips caused by voltage drops.
  • Postflow cooling circuit - Extends life of consumables and torch by cooling them with postflow air after trigger is released.

TOOLIOM 50A Non-Touch Pilot ARC Air Plasma Cutter Dual Voltage 110V/220V IGBT Inverter Metal Cutting Machine 1/2" Clean Cut

$269.99  in stock
2 new from $269.99
Free shipping
as of December 22, 2021 11:52 am

Features

  • Non-touch Polit ARC: Can effectively cut rough, painted and rusty surfaces, and generates the least slag. The torch head does not need to touch the metal plate, then it will start arc. Better cutting quality and longer consumable life
  • Powerful Cutting Effect: Up to 50A output, 60% Duty Cycle, maximum 1/2" clean cut.
  • Multi-applications: Suitable for cutting stainless steel, alloy steel, low carbon steel, copper and other metal materials.
  • Safety Protection: Certificated by ETL, built in over current protection, over load protection, temperature control.
  • Portable: Auto-voltage adapts to 110 V - 220 V input power with adapter. Lightweight 13lb, can be carry and storage anywhere you need.

YESWELDER CUT-55DS 55Amp Non-Touch Pilot Arc Air Plasma Cutter 1/2 Inch Clean Cut, Digital 110/220V Dual Voltage IGBT Inverter Plasma Cutting Machine with ETL Approved

$499.99
$400.00
 in stock
2 new from $400.00
Free shipping
as of December 22, 2021 11:52 am

Features

  • Non-Touch Pilot Arc: Efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.
  • Built-in Post Flow:When you stop cutting, the air runs on for a minute to cool the consumable of the plasma cutter torch. This will extend consumable life.
  • Powerful Cutting Ability:10-55 A DC output, 1/2”ideal clean cut and 3/4”maximum severance cut under 220/240V,60% Duty Cycle. Uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.
  • Lightweight and Portable:Allows for connection to 110- or 220-volt receptacles without tools,Portable in the shop or at the job site—at 13 lb the shoulder strap allows the end user to easily move from location to location
  • Added Safety:Certificated by ETL,Automatic compensation for voltage fluctuation, over current protection, over load protection,temperature control

APC-70HF, Professional 70 Amp Non-touch Pilot Arc Plasma Cutter, 1.2 inch Clean Cut, 80% Duty Cycle, 90V to 300V Wide Voltage Cutting Machine

$579.00  in stock
2 new from $579.00
as of December 22, 2021 11:52 am

Features

  • APC-70HF incorporates the most advanced IGBT inverter technology and non-touch pilot arc cutting processes, resulting in excellent arc stability. The cutting effect is very ideal and can finish the work effortlessly and quickly, regardless if the material is very rough, rusty, greasy, dirty, spray painted, etc. The lightweight model design makes the machine very convenient to carry anywhere.
  • APC-70HF can achieve perfect cutting, and the strength of its components makes it a reliable work tool for professionals or individuals. Can cut up to 1.2 in. stainless steel, alloy steel, low-carbon steel, copper, iron, pig iron, cast iron, aluminum alloy, aluminum and other conductive metals, resulting in straight cuts, angles, holes, curves, notches, slots, circles, v-grooves, and many others in minutes.
  • APC-70HF is an intelligent power supply system. The automatic selection function can automatically detect the input voltage, so that you can easily use it in of 90V to 300V, and the machine will automatically adjust it. It is designed for demanding industrial work and construction and simple tasks around houses. With less work, you can achieve better results overall with sharper cuts.
  • 80% duty cycle can ensure long-term and efficient cutting. NPT 1/4 inch industrial D-type coupler can easily and quickly connect to the air compressor. Extending the power cord by 700 feet can also resist power fluctuations and cable attenuation; the machine can still work normally. It is fully suitable for difficult operations in construction sites, ship docks, agricultural sites, and relatively remote areas.
  • APC-70HF is designed with multiple safety and protection functions, such as automatic compensation for voltage fluctuations, over-heating protection, over-current protection, over-loading protection, plasma torch gun safety protection, etc. The fan with automatic temperature control allows the machine to run very quietly.

Lotos LT3500 35 Amp Air Plasma Cutter, 2/5 Inch 10 mm Clean Cut, 110V/120V Input with Pre Installed Air Filter Regulator with NPT Quick Connector, Brown

$239.00
$169.00
 in stock
2 new from $169.00
Free shipping
as of December 22, 2021 11:52 am

Features

  • ★ PORTABLE but POWERFUL--the Lotos LT3500 can easily cut up to 2/5”(10 mm) metal under maximum output with ultimate portability weighing only 18lbs; The LT3500 is an excellent choice for home DIY jobs and light duty small business projects.
  • ★ QUICK Setup--the per installed Air filter Regulator with NPT 1/4” industry type D plug allows you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The 110V input design allows the machine can easily connected to your existing 110v wall outlet. The whole machine can be setup quickly within 1 mins.
  • ★ INPUT & OUTPUT--110V-125V, 1PH, 50/60Hz @ 40 A input, Minimum Circuit Breaker Size Requirement: 40 AMP at fully output(35AMP/3/8inch cut); Automatic dual frequency (50/60Hz); 12-35 A DC output, 2/5” ideal clean cut and 1/2” maximum severance cut
  • ★ INPUT & OUTPUT--110V-125V, 1PH, 50/60Hz @ 40 A input, Minimum Circuit Breaker Size Requirement: 40 AMP at fully output(35AMP/3/8inch cut); Automatic dual frequency (50/60Hz); 12-35 A DC output, 2/5” ideal clean cut and 1/2” maximum severance cut
  • ★ BUY WITH CONFIDENCE: We offer 30 days refund and a 3-YEARS Limited Warranty: include 1 Year NEW Replacement Warranty. ★ US BASED CUSTOMER CARE & SUPPORT TEAM: please feel free to contact us by phone or email, we always stand Back on Our Products. Please submit the registration form on our website.

Reboot Plasma Cutter Machine Inverter RBC-4000 AC 110V Air 1/2'' Plasma Cutting High Frequency 90% Duty Cycle for Aluminum Stainless Mild Steel Copper Iron Chrome

$199.99  in stock
as of December 22, 2021 11:52 am

Features

  • This RBC-4000 plasma cutting machine works with 110v 40a output. 60% at 40a,100% at 28a.Duty cycle high frequency air plasma cutter.air pressure 60-70psi
  • Plasma Cutter Max rated clean cutting thickness: 9mm. 【50A breaker suggested for 110V】
  • Cutting Material: aluminum,stainless steel, alloy steel, mild steel, copper, cast iron and chrome.
  • Plasma Cutter package kit: 13ft pt31 cutting torch /earth clamp each 6.56 ft cable /hose 6.5ft /air pressure valve
  • Buy with confidence as we offer 30-day 100% satisfaction or money-back guarantee and 2-year limited warranty.Click on the add to cart button now!
See also  Best Quality Handkerchiefs

Leave a Comment